DKGB2-3000-2V3000AH SEALED GEL LEAD ACID BATTERY

Technical Features

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger.
2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 C ,and gel:-35-60 C), suitablefor indoor and outdoor use in varies environments.
3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. and electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development.
4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection.
5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

Parameter

Model	Voltage	Capacity	Weight	Size
DKGB2-100	2v	100Ah	5.3kg	171*71*205*205mm
DKGB2-200	2v	200Ah	12.7kg	171*110*325*364mm
DKGB2-220	2v	220Ah	13.6kg	171*110*325*364mm
DKGB2-250	2v	250Ah	16.6kg	170*150*355*366mm
DKGB2-300	2v	300Ah	18.1kg	170*150*355*366mm
DKGB2-400	2v	400Ah	25.8kg	210*171*353*363mm
DKGB2-420	2v	420Ah	26.5kg	210*171*353*363mm
DKGB2-450	2v	450Ah	27.9kg	241*172*354*365mm
DKGB2-500	2v	500Ah	29.8kg	241*172*354*365mm
DKGB2-600	2v	600Ah	36.2kg	301*175*355*365mm
DKGB2-800	2v	800Ah	50.8kg	410*175*354*365mm
DKGB2-900	2v	900AH	55.6kg	474*175*351*365mm
DKGB2-1000	2v	1000Ah	59.4kg	474*175*351*365mm
DKGB2-1200	2v	1200Ah	59.5kg	474*175*351*365mm
DKGB2-1500	2v	1500Ah	96.8kg	400*350*348*382mm
DKGB2-1600	2v	1600Ah	101.6kg	400*350*348*382mm
DKGB2-2000	2v	2000Ah	120.8kg	490*350*345*382mm
DKGB2-2500	2v	2500Ah	147kg	710*350*345*382mm
DKGB2-3000	2v	3000Ah	185kg	710*350*345*382mm

production process

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Certifications

More for reading

Principle of common storage battery
The battery is a reversible DC power supply, a chemical device that provides and stores electrical energy. The so-called reversibility refers to the recovery of electric energy after discharge. The electric energy of the battery is generated by the chemical reaction between two different plates immersed in the electrolyte.

Battery discharge (discharge current) is a process in which chemical energy is converted into electrical energy; Battery charging (inflow current) is a process in which electrical energy is converted into chemical energy. For example, lead-acid battery is composed of positive and negative plates, electrolyte and electrolytic cell.

The active substance of the positive plate is lead dioxide (PbO2), the active substance of the negative plate is gray spongy metal lead (Pb), and the electrolyte is sulfuric acid solution.

During the charging process, under the action of an external electric field, the positive and negative ions migrate through each pole, and chemical reactions occur at the electrode solution interface. During charging, the lead sulfate of the electrode plate recovers to PbO2, the lead sulfate of the negative electrode plate recovers to Pb, the H2SO4 in the electrolyte increases, and the density increases.

The charging is carried out until the active substance on the electrode plate completely recovers to the state before discharge. If the battery continues to be charged, it will cause water electrolysis and emit a lot of bubbles. The positive and negative electrodes of the battery are immersed in the electrolyte. As a small amount of active substances are dissolved in the electrolyte, the electrode potential is generated. The electromotive force of the battery is formed due to the difference of the electrode potential of the positive and negative plates.

When the positive plate is immersed in the electrolyte, a small amount of PbO2 dissolves into the electrolyte, generates Pb (HO) 4 with water, and then decomposes into fourth order lead ions and hydroxide ions. When they reach dynamic balance, the potential of positive plate is about+2V.

The metal Pb at the negative plate reacts with the electrolyte to become Pb+2, and the electrode plate is negatively charged. Because positive and negative charges attract each other, Pb+2 tends to sink on the surface of the electrode plate. When the two reach dynamic balance, the electrode potential of the electrode plate is about -0.1V. The static electromotive force E0 of a fully charged battery (single cell) is about 2.1V, and the actual test result is 2.044V.

When the battery is discharged, the electrolyte inside the battery is electrolyzed, the positive plate PbO2 and the negative plate Pb become PbSO4, and the electrolyte sulfuric acid decreases. Density decreases. Outside the battery, the negative charge pole on the negative pole flows to the positive pole continuously under the action of the battery electromotive force.

The whole system forms a loop: oxidation reaction takes place at the negative pole of the battery, and reduction reaction takes place at the positive pole of the battery. As the reduction reaction on the positive electrode makes the electrode potential of the positive plate gradually decrease, and the oxidation reaction on the negative plate makes the electrode potential increase, the whole process will cause the decrease of the battery electromotive force. The discharge process of the battery is the reverse of its charging process.

After the battery is discharged, 70% to 80% of the active substances on the electrode plate have no effect. A good battery should fully improve the utilization rate of active substances on the plate.